ZMESH


Zmesh is a 9 or 12 inch wide bronze mesh heating element used for in-floor radiant space heating, radiant floor heating, and roof de-icing. Zmesh can be installed under roofing and under most floor coverings including carpet, hardwood, tile and slate. Zmesh's durability is also perfect for your remodeling/retrofit applications. Click here to find out about our Tuff Cable heating element






Install under hard wood flooring, carpet, tile, linoleum/vinyl, and marble.



Install under shingles, single-ply membrane, built-up, or metal.



Zmesh can be stapled and nailed right through for easy installation. In addition, surface buildup is not necessary with Zmesh.




Zmesh is our premier product because of its extremely low profile and ability to heat evenly. No other heating product can match its characteristics. Because Zmesh is so thin, it will not affect your floor buildup, weight loads or flooring choices. Zmesh can even be installed underneath the cement board when used to heat tile (which actually retains the heat longer when the system is turned off). No additional mortar or thin set is needed to cover the heating system because it is sandwiched in between the sub floor and cement board.




The Zmesh heating system provides innovative methods for radiant heating. Utilizing state of the art components and low-voltage electricity, our products are virtually maintenance free, and are safe and efficient in operation. Zmesh has a limited 25 year warranty and is engineered to provide simple and problem-free solutions. Our low-voltage products have been in use since 1978.




Installation of Zmesh under tile in kitchen



Photograph of completed kitchen project





Zmesh installed on plywood subfloor with minimum 1/8" underlayment required between Zmesh and carpet padding



Zmesh installed on concrete substrate - Carpet and padding can be installed directly over Zmesh

POWER REQUIREMENTS

  • Zmesh systems heating a 21 to 300 sq. ft. area require a 240 v. 20 amp breaker

  • Zmesh systems heating a 300 to 740 sq. ft. area require a 240 v. 30 amp breaker

  • Tuff Cable systems heating a 15 to 110 sq. ft. area require a 120 v. 20 amp breaker

  • Tuff Cable systems heating a 111 to 200 sq. ft. area require a 240 v. 20 amp breaker

  • Tuff Cable systems heating a 200 to 485 sq. ft. area require a 240 v. 30 amp breaker